Centraline elettroniche

Il circuito stampato è inserito in un involucro di resina poliuretanica mediante un procedimento di colata sottovuoto all’interno di uno stampo.
Questo procedimento rende le centraline elettroniche adatte ad essere utilizzate su macchinari che operano in ambienti di lavoro gravosi, con un grado di protezione molto elevato. L’estrema flessibilità degli ingressi e delle uscite rende facile l’integrazione e l’implementazione in molteplici applicazioni e funzioni. L’alimentazione delle centraline è conforme allo standard automotive (9-36 VDC). Esse sono impiegabili come master oppure come slave in una rete CAN.

Di seguito tutti i nostri modelli

Scarica scheda tecnica

ALMEXT

Il controller ALMEXT può gestire fino a 12 ingressi e fino a 8 uscite.

Le dimensioni ridotte e la facile installazione, rendono il controller adatto per applicazioni a basso costo, ma che richiedono un elevato requisito di sicurezza, grazie alla doppia CPU per raggiungere il PLd (A).

Può essere implementato in una rete CAN, come MASTER o SLAVE.

Il materiale di alta qualità del case rende il controller adatto all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: ALMEXT
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 50 mAAT 24 VDC (STAND BY MODE)
INPUT (TOTAL 20):
UP TO 8 ANALOGIC INPUTS (VOLTAGE0..40V / DIGITAL HIGH/LOW SIDE)
UP TO 4 DIGITAL INPUTS (DIGITAL HIGH SIDE / FREQUENCY UP TO 10kHz)
UP TO 8 ANALOGIC INPUTS (VOLTAGE0..40V/ CURRENT 4…20mA / DIGITAL HIGH-LOW SIDE)
OUTPUT (TOTAL 12):
UPTO 12 DIGITAL OUTPUTS (HIGH/LOW SIDE OR PWM HIGH SIDE OUTPUTS
CURRENT:MAX 4A FOR SINGLE OUTPUT (MAXTOTAL HIGH SIDE OUTPUTS CURRENT: 15 A)
SENSOR SUPPLY (*): 5V, 500mA, SHORT CIRCUIT AND OVERLOAD PROTECTED
SAFETY (*): CROSSCONTROL STATUS (FEEDBACK WATCHDOG): RELAYSWITCH (NO) MAX 10 A
The contact is closed on safety condition
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939 / FMS
AUX COMMUNICATION PORT2 (*): SERIAL RS232
CONNECTIONS PORT (1): SICMA 24 PIN
WORKING TEMPERATURE: -40°C +85°C
MATERIAL: CASE :ABS+ PA66 -UL 94 V0 / GASKET: TPE
NOTE1: See the pinout table for INPUT and OUTPUT pin sharing. The pin function can be configured by software.
*NOTE2: optional (see the hardware configuration)

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab C PROGRAM OPEN SOURCE SOFTWARE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CPU	DOUBLE ARM CORTEX M4, 32BIT CORE
MEMORY	FLASH (PROGRAM MEMORY): 1 MB RAM MEMORY: 128 KB EEPROM: 128 KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2
ROAD VEHICLES — ELECTRICAL DISTURBANCES FROM CONDUCTION AND COUPLING — PART 2	ISO 7637-2: 2011
ROAD VEHICLES — COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY — PART 1	ISO 11452-1: 2005
VERIFICATIONS AND TESTS PERFORMED ACCORDING TO THE REQUIREMENTS OF UNECE REGULATION 10 – AMENDMENT 06 – SUPPLEMENT 0	E3 – TYPE APPROVAL
BOX IP	IP65
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLd – SIL2 (DOUBLE-CHANNEL INTERNAL SCHEME)

Scarica scheda tecnica

SPN9

Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.

Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN.9
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 60 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 48):
MAX 16 ANALOGICINPUT WITH 0..40 V and 4..20 mA CAPABILITY – RESOLUTION FOR 0..40V INPUT: 10mV
MAX 16 ANALOGICINPUT WITH 0..40 V CAPABILITY – RESOLUTION FOR 4..20mA INPUT: 20uA
MAX 12 OPTO-COUPLED DIGITAL HIGH/LOW SIDE INPUTS – FREQUENCY RANGE FOR COUNTER (1-1000Hz)
MAX 4 OPTO-COUPLED DIGITAL HIGH SIDE INPUTS WITH PULSE COUNTER – THRESHOLD FOR DIGITAL IN: SW CONFIGURABLE
OUTPUT (TOTAL 40):
MAX 24 DIGITAL / PWM OPEN-LOOP / CURRENT CLOSED LOOP –
SINGLE OUTPUT MAX CURRENT : 4A TOTAL CURRENT MAX: 32A
MAX 8 DIGITAL / PWM OPEN-LOOP / CURRENT CLOSED LOOP SAFETY -REDUNDANT OUTPUT STAGE –
SINGLE OUTPUT MAX CURRENT : 4A TOTAL CURRENT MAX: 32A
MAX 8 DIGITAL HIGH SIDE LOW CURRENT OUTPUTS – LOW CURRENT OUTPUT CURRENT: 2A TOTAL CURRENT MAX: 8A
CAN BUS: 1 PORT:2.0BCOMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
OPTIONAL ADDITIONAL PORTS:
No.1 SERIAL RS232 PORT
No.1 CAN-BUS PORT 2.0BCOMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CONNECTION : See«COUPLING CONNECTORS» table
2 MOLEX 32 PIN , 2 MOLEX 48 PIN
WORKING TEMPERATURE: -40°C + 85°C
CASE MATERIAL: PUR , UL94–V0

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	1 ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE, 120 MHz CLOCK FREQUENCY
INTERNAL MEMORY	FLASH (PROGRAM MEMORY): 1 MB RAM MEMORY: 128 KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	95,47 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLd – SIL2 (DUAL-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN8

Il controller SPN8 è una ECU (Electronic Control Unit) in grado di gestire fino a 24 ingressi e fino a 20 uscite.

Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.

Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN.8
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 30 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 24):
MAX 8 ANALOGIC INPUT WITH 0..40 V and 4..20 mA CAPABILITY – RESOLUTION FOR 0..40V INPUT: 10mV
MAX 8 ANALOGICINPUT WITH 0..40 V CAPABILITY – RESOLUTION FOR 4..20mA INPUT: 20uA
MAX 6 OPTO-COUPLED DIGITAL HIGH/LOW SIDE INPUTS – FREQUENCY RANGE FOR COUNTER (1-1000Hz)
MAX 2 OPTO-COUPLED DIGITAL HIGH SIDE INPUTS WITH PULSE COUNTER – THRESHOLD FOR DIGITAL IN: SW CONFIGURABLE
OUTPUT (TOTAL 20):
MAX 12 DIGITAL / PWM OPEN-LOOP / CURRENT CLOSED LOOP – SINGLE OUTPUT MAX CURRENT : 4A TOTAL CURRENT MAX: 16A
MAX 4 DIGITAL / PWMOPEN-LOOP / CURRENT CLOSED LOOP SAFETY -REDUNDANT OUTPUT STAGE – SINGLE OUTPUT MAX CURRENT : 4A TOTAL CURRENT MAX: 16A
MAX 4 DIGITAL HIGH SIDE LOW CURRENT OUTPUTS – LOW CURRENT OUTPUT CURRENT: 2A TOTAL CURRENT MAX: 4A
CAN BUS : 1 PORT: 2.0BCOMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE
OPTIONAL ADDITIONAL PORTS:
No.1 SERIALRS232 PORT
No.1 CAN-BUS PORT 2.0BCOMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CONNECTION: See«COUPLING CONNECTORS» table
1 MOLEX 32 PIN , 1 MOLEX 48 PIN
WORKING TEMPERATURE: -40°C + 85°C
CASE MATERIAL: PUR, UL94–V0

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	1 ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE, 120 MHz CLOCK FREQUENCY
INTERNAL MEMORY	FLASH (PROGRAM MEMORY): 1 MB RAM MEMORY: 128 KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	115,34 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN6

Il controller SPN6 è una ECU (Electronic Control Unit) in grado di gestire fino a 48 ingressi e fino a 40 uscite.
Può essere implementabile nella linea RS232 o nella rete CAN come MASTER o SLAVE
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

È certificato E UNECE norma 10 automotive

MASTER CODE: SPN6
POWERSUPPLY: 9-36 VDC / CURRENT ABSORPTION 50 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 48): 16 UNIVERSAL INPUT – 32 DIGITAL INPUTS
OUTPUT (TOTAL 40 OR 32): 24 PWM / DIGITAL OUTPUTS AND 16 DIGITAL HIGHSIDE OUTPUTS OR 24 PWM / DIGITAL OUTPUTS AND 8 RELAY DRY CONTACT OUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CANBUSPROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
CONNECTION (4): NR.2 MOLEX 32 PIN – NR.2 MOLEX 48 PIN
CASE: PUR
WORKING TEMPERATURE: -40°C + 80°C

SLAVE USAGE	EDS FILE
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	10 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	112,25 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLd – SIL2 (DUAL-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN6M

Il controller SPN6M è una ECU (Electronic Control Unit) in grado di gestire fino a 32 ingressi e fino a 32 uscite.
Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN6M
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 100 mA AT 24 VDC (STAND BY MODE)
INPUT (UP TO 32*):
UP TO 32 DIGITAL INPUTS (HIGH SIDE)
UP TO 28 ANALOGIC INPUTS (FULL RANGE 0..40V)
UP TO 8 ANALOGIC INPUTS (4…20mA)
UP TO 4 FREQUENCY INPUTS (HIGH SIDE UP TO 100Hz)
OUTPUT (UP TO 32*):
UP TO 16 PWM HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 32 HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 8 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 500mA FOR EACH OUTPUT PIN)
UP TO 8 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 30mA FOR EACH OUTPUT PIN)
CAN BUS (3 PORTS): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (2 PORTS): RS232
RTC: NO(REFER TO THE SPN6M RTC VERSION)
CONNECTIONS PORTS (2): MOLEX 48 PIN
CASE: PUR
WEIGHT: 426g
WORKING TEMPERATURE: -40°C +80°C
* See the pinout table for the pin sharing. The pin function can be configured by software.
**Max total high side outputs current 12 A

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	LESS THAN 2 ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE
MEMORY	FLASH (PROGRAM MEMORY): 1MB RAM MEMORY: 256KB EEPROM: 128KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	MOSFET OUTPUT: 151,35 YEARS INPUT ONLY: 162,33 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLd – SIL2 (DUAL-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN6M.RTC

Il controller SPN6M è una ECU (Electronic Control Unit) in grado di gestire fino a 32 ingressi e fino a 32 uscite.
Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN6M RTC
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 100 mA AT 24 VDC (STAND BY MODE)
INPUT (UP TO 32*):
UP TO 32 DIGITAL INPUTS (HIGH SIDE)
UP TO 28 ANALOGIC INPUTS (FULL RANGE 0..40V)
UP TO 8 ANALOGIC INPUTS (4…20mA)
UP TO 4 FREQUENCY INPUTS (HIGH SIDE UP TO 100Hz)
OUTPUT (UP TO 32*):
UP TO 16 PWM HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 32 HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 8 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 500mA FOR EACH OUTPUT PIN)
UP TO 8 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 30mA FOR EACH OUTPUT PIN)
CAN BUS (3 PORTS):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (2 PORTS): RS232
RTC: YES
CONNECTIONS PORTS (2): MOLEX 48 PIN
CASE: PUR
WEIGHT: 426g
WORKING TEMPERATURE: -40°C +80°C
* See the pinout table for the pin sharing. The pin function can be configured by software.
**Max total high side outputs current 12 A

ELECTRONIC FEATURES
SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	LESS THAN 2 ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE
MEMORY	FLASH (PROGRAM MEMORY): 1MB RAM MEMORY: 256KB EEPROM: 128KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	MOSFET OUTPUT: 151,35 YEARS INPUT ONLY: 162,33 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLd – SIL2 (DUAL-CHANNEL INTERNAL SCHEME)

Scarica scheda tecnica

SPN5

Il controller SPN5 è una ECU (Electronic Control Unit) in grado di gestire fino a 24 ingressi e fino a 20 uscite.
Può essere implementabile nella linea RS232 o nella rete CAN come MASTER o SLAVE
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

È certificato E UNECE norma 10 automotive

MASTER CODE: SPN5
POWERSUPPLY: 9-36 VDC / CURRENT ABSORPTION 50 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 24): 8 UNIVERSAL INPUT- 16 DIGITAL INPUTS
OUTPUT (TOTAL 20 OR 16): 12PWM / DIGITAL OUTPUTS AND 8 DIGITAL HIGHSIDE LOW CURRENT OUTPUTS OR 12 PWM / DIGITAL OUTPUTS AND 4 RELAY DRY CONTACT OUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
CONNECTION (2): 1 MOLEX 32 PIN – 1 MOLEX 48 PIN
CASE: PUR
WORKING TEMPERATURE: -40°C + 80°C

SLAVE USAGE	EDS FILE
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	10 ms
CPU	PIC 16 bit
INTERNAL MEMORY	FLASH: 256 KB RAM: 28 KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	112,25 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN5M

Il controller SPN5M è una ECU (Electronic Control Unit) in grado di gestire fino a 16 ingressi e fino a 16 uscite.
Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN5M
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 100 mA AT 24 VDC (STAND BY MODE)
INPUT (UP TO 16*):
UP TO 16 DIGITAL INPUTS (HIGH SIDE)
UP TO 14 ANALOGIC INPUTS (FULL RANGE 0..40V)
UP TO 4 ANALOGIC INPUTS (4…20mA)
UP TO 2 FREQUENCY INPUTS (HIGH SIDE UP TO 100Hz)
OUTPUT (UP TO 16*):
UP TO 8 PWM HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 16 HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 4 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 500mA FOR EACH OUTPUT PIN)
UP TO 4 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 30mA FOR EACH OUTPUT PIN)
CAN BUS (2 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (1 PORT): RS232
RTC: NO(REFER TO THE SPN5M RTC VERSION)
CONNECTION PORT (1): MOLEX 48 PIN
CASE: PUR
WEIGHT: 275 g
WORKING TEMPERATURE: -40°C +80°C
* See at the pinout table for the pin sharing. The pin functioncan be configured by software.
**Max total high side outputs current 12 A

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	LESS THAN 2 ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE
MEMORY	FLASH (PROGRAM MEMORY): 1MB RAM MEMORY: 256KB EEPROM: 128KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	MOSFET OUTPUT: 151,35 YEARS INPUT ONLY: 162,33 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN5M.RTC

Il controller SPN5M è una ECU (Electronic Control Unit) in grado di gestire fino a 16 ingressi e fino a 16 uscite.
Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN5M RTC
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 100 mA AT 24 VDC (STAND BY MODE)
INPUT (UP TO 16*):
UP TO 16 DIGITAL INPUTS (HIGH SIDE)
UP TO 14 ANALOGIC INPUTS (FULL RANGE 0..40V)
UP TO 4 ANALOGIC INPUTS (4…20mA)
UP TO 2 FREQUENCY INPUTS (HIGH SIDE UP TO 100Hz)
OUTPUT (UP TO 16*):
UP TO 8 PWM HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 16 HIGH SIDE OUTPUTS (MAX 2A FOR EACH OUTPUT PIN)**
UP TO 4 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 500mA FOR EACH OUTPUT PIN)
UP TO 4 LOW SIDE OUTPUTS –SHARED PIN WITH INPUTS (MAX 30mA FOR EACH OUTPUT PIN)
CAN BUS (2 PORT):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (1 PORT): RS232
RTC: YES
CONNECTION PORT (1): MOLEX 48 PIN
CASE: PUR
WEIGHT: 375 g
WORKING TEMPERATURE: -40°C +80°C
* See at the pinout table for the pin sharing. The pin function can be configured by software.
**Max total high side outputs current 12 A

SLAVE USAGE	EDS FILE
MASTER USAGE	ALMEClab
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	LESS THAN 2ms
CPU	FAMILY: ARM CORTEX M4, 32BIT CORE
MEMORY	FLASH (PROGRAM MEMORY): 1MB RAM MEMORY: 256KB EEPROM: 128KB

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	MOSFET OUTPUT: 151,35 YEARS INPUT ONLY: 162,33 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN5M SMART

Il controller SPN5M SMART è una ECU (Electronic Control Unit) dotata di smart high side mosfet.
Può gestire fino a 16 ingressi e fino a 16 uscite.
Può essere facilmente e rapidamente implementato in una rete CANBUS come SLAVE, con protocolli CANopen.
il case in resina poliuretanica rende il controller idoneo all’uso su macchine che operano in ambienti di lavoro gravosi

MASTER CODE: SP.5MS.426
POWER SUPPLY: 9-36 VDC
INPUT: TOTAL No. 16 INPUTS, SOFTWARE CONFIGURABLEAS:
•UP TO 16 DIGITAL INPUTS(HIGH SIDE)
•UP TO 14 ANALOGICINPUTS(040V)
•UP TO 4 ANALOGICINPUTS(420mA)
•UP TO 2 FREQUENCYINPUTS(11000Hz)
OUTPUT TOTAL No. 16 OUTPUTS, SOFTWARE CONFIGURABLEAS:
•UP TO 8 PWM HIGH SIDE OUTPUTS
•UP TO 16 HIGH SIDE OUTPUTS(MAX2A FOR EACH OUTPUT PIN)
→MAXTOTAL HIGH SIDE OUTPUTS CURRENT 10 A)
•UP TO4 DIGITAL LOWSIDE OUTPUT (MAX500mAFOR EACHOUTPUT PIN)
CAN BUS: No. 1 PORT: 2.0BCOMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
OPTIONALS: RTC(realtime clock), Additional 2nd CAN-BUS PORT
CONNECTION
See«MATINGCONNECTORS» table
MOLEX 48 PIN CONNECTOR
CASE: PUR, UL94-V0
PROTECTION: IP68
WORKING TEMPERATURE: -40°C +85°C

SLAVE USAGE	EDS FILE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	Less than 0,5 ms
CPU	PIC 16 bit
INTERNAL MEMORY	FLASH (PROGRAM MEMORY): 1MB EEPROM: 128KB

DIRECTIVE	2014/30/EU (EMC)
ELECTROMAGNETIC COMPATIBILITY	EN 50498
ELECTROMAGNETIC EMISSIONS	EN 61000-6-4
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2
ROAD VEHICLES ELECTRICAL DISTURBANCES FROM CONDUCTION AND COUPLING — PART 2	ISO 7637-2: 2011
ROAD VEHICLES COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY — PART 1	ISO 11452-1: 2005
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)

Scarica scheda tecnica

SPN4

Il controller SPN4 è una ECU (Electronic Control Unit) in grado di gestire fino a 8 ingressi e fino a 12 uscite.
Può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.
Il case in resina poliuretanica rende i controller adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN4
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 25 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 8):
4 UNIVERSALINPUT
4 DIGITAL INPUTS
OUTPUT (TOTAL 12)
8 PWM/DIGITAL OUTPUTS OR 4 PWM/DIGITAL OUTPUTS & 4 RELAY WITH DRY CONTACT OUTPUTS
4 DIGITAL LOW SIDE OUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CANBUSPROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (1PORT): RS232
CONNECTIONS PORT (2)
NR.1 MOLEX 32 PIN
NR.1 MOLEX 48 PIN
WORKING TEMPERATURE: -40°C +80°C
CASE: PUR

SLAVE USAGE	EDS FILE
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	10 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	55,98 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN3

Il controller SPN3 è una ECU (Electronic Control Unit) in grado di gestire fino a 8 ingressi e fino a 8 uscite. Può essere implementato in una rete CAN, come MASTER o SLAVE. Le risorse sono disposte separatamente per facilitare le riparazioni delle utenze e il case in resina poliuretanica rende i controller adatti per l’uso su macchine che operano in ambienti di lavoro difficili

MASTER CODE: SPN3
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 25 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 8) 4 UNIVERSAL INPUTS – 4 DIGITAL INPUTS
OUTPUT (TOTAL 8) 8 PWM/ DIGITALOUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE) ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
CONNECTIONS (PORT 20): 2 AMP SUPERSEAL 6 PIN – 10 AMP SUPERSEAL 2 PIN – 8 AMP SUPERSEAL 3 PIN
WORKING TEMPERATURE: -40°C +80°C
CASE: PUR

SLAVE USAGE	EDS
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	50 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	55,98 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN2

Il controller SPN2 è una ECU (Electronic Control Unit) in grado di gestire fino a 8 ingressi e fino a 12 uscite. Può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE. Le risorse sono disposte separatamente per facilitare le riparazioni delle utenze e il case in resina poliuretanica rende i controller adatti per l’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN2
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 25 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL 8): 4 UNIVERSAL INPUTS – 4 DIGITAL INPUTS
OUTPUT (TOTAL 12): 8 PWM/ DIGITALOUTPUTS – 4 DIGITALLOW SIDE OUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CANBUSPROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE) ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL PORT (1 PORT): RS232
CONNECTIONS PORT (11 ): 2 AMP SUPERSEAL 6 PIN –STANDARD CABLE LENGTH: 40 cm 9 AMP SUPERSEAL 4 PIN -STANDARD CABLE LENGTH: 40 cm
WORKING TEMPERATURE: -40°C +80°C
CASE: PUR

SLAVE USAGE	EDS
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	50 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	55,98 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

SPN1

Il controller SPN1 è una ECU (Electronic Control Unit) in grado di gestire fino a 8 ingressi e fino a 12 uscite. Può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE. Le risorse sono disposte separatamente per facilitare le riparazioni delle utenze e il case in resina poliuretanica rende i controller adatti per l’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: SPN1
POWER SUPPLY: 9-36 VDC / CURRENT CONSUMPTION 25 mA AT 24 VDC (STAND BY MODE)
INPUT (TOTAL8): 4 UNIVERSAL INPUTS – 4 DIGITAL INPUTS
OUTPUT (TOTAL12): 8 PWM / DIGITAL OUTPUTS OR 4 RATIOMETRIC OUTPUT – 4 DIGITAL LOW SIDE OUTPUTS
CAN BUS (1 PORT): 2.0B COMPLIANT – (11, 29 BIT) – ISO 11898 – UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE). ON REQUEST: SAE J1939 – ISO 11783 (ISO BUS) – FMS
SERIAL PORT (1PORT): RS232
CONNECTIONS PORT (10): 1 AMP SUPERSEAL 6 PIN – STANDARD CABLE LENGTH: 40 cm – 9 AMP SUPERSEAL 4 PIN – STANDARD CABLE LENGTH: 40 cm
WORKING TEMPERATURE: -40°C +80°C
CASE: PUR

SLAVE USAGE	EDS
MASTER USAGE	STANDARD C PROGRAM LANGUAGE
PROGRAMMING	FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME	50 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX: IP68; CONNECTORS: IP67
MTTFd	55,98 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Scarica scheda tecnica

CB01R

Il controller CB01R può gestire fino a 16 ingressi o uscite. Le dimensioni ridotte e la facilità di installazione, rendono il controller adatto per applicazioni a basso costo e possono essere implementati in una rete CAN, come MASTER o SLAVE. Il case in resina poliuretanica rende i controller appartenenti a questa famiglia adatti all’uso su macchine che operano in ambienti di lavoro difficili.

MASTER CODE: CB01R
POWERSUPPLY: 9-36 VDC / CURRENT CONSUMPTION 20 mA AT 24 VDC (STAND BY MODE)
DIGITAL INPUT (ON/OFF) OUTPUT (ON/OFF) (TOTAL 16):
16 OPTO ISOLATED INPUT (HIGH SIDE) – 16 ON/OFF OUTPUT (MAX TOTAL ABSORPTION 500mA, HIGH SIDE ) INPUT& OUTPUT PIN CONFIGURABLE BY SOFTWARE
CAN BUS (1 PORT):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S (CAN TERMINATION CONFIGURABLE BY SOFTWARE)
CANBUSPROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE) ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
CONNECTIONS PORT (3or 1):
N.2 8X1 PUR CABLE –CONNECTOR: (SEE THE TABLE A «CONNECTORS») N.1 4×0,75 PUR CABLE –CONNECTOR: (SEE THE TABLE A «CONNECTORS») OR N.1 25X0,50 NUMERATED PUR CABLE –(SEE THE TABLE B «CONNECTORS»)
WORKING TEMPERATURE: -40°C +80°C
CASE: PUR

SLAVE USAGE	EDS FILE
CYCLE TIME	100 ms

ELECTROMAGNETIC EMISSIONS	EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY	EN 61000-6-2// EN 61000-4-2/3/4/6
IP	BOX IP68
MTTFD	62,88 YEARS CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL	PLc – SIL1 (SINGLE-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE EN509498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

Contatti

Usa il form qui di fianco per scrivere una mail ai nostri uffici, sarà nostra cura risponderti il prima possibile. Alternativamente, usa i seguenti recapiti per contattarci:
Tel: +39 0173.742821
Fax: +39 0173.70189
Email info@almec.net
Assistenza: assistenza@almec.net