Plc

Pensati per essere connessi in una rete CAN o seriale (RS232), questi dispositivi sono utilizzabili in applicazioni in cui è richiesta flessibilità ed affidabilità dell’impianto. Il design compatto e l’estrema flessibilità degli ingressi e delle uscite li rende facilmente integrabili in applicazioni con installazioni su guide DIN (tipo G / Ω) all’interno di quadri elettrici. L’alimentazione dei Plc è conforme allo standard automotive (9-36 VDC). Essi sono impiegabili come master oppure come slave in una rete CAN.

Di seguito tutti i nostri modelli

PLC.163

Il controller PLC.163 può gestire fino a 20 ingressi e fino a 13 uscite.

Il design compatto e l’ampio assortimento di ingressi e uscite, rendono il controller facilmente integrabile nell’installazione su guida DIN (tipo G / Ω), all’interno di quadri elettrici, dove sono richiesti flessibilità e affidabilità del sistema.

Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.

MASTER CODE: PLC.163
POWER SUPPLY: 9 -36 VDC / CURRENT ABSORPTION 50 mA AT 24 VDC (STAND BY MODE)
PUSHBUTTON (TOTAL 3): PROGRAMMABLE
INPUT (TOTAL 20):
N. 4 DIGITAL INPUTS HighSide–LowSide(voltage threshold is sw configurable)
N.4 DIGITAL INPUTS HighSide–LowSide(voltage threshold is sw configurable) -Frequency/Counter1..1000Hz (resolution 1Hz)
N.4 DIGITAL INPUTS HighSide-ANALOG INPUTS (0 –40V resolution 10mV)
N. 8 DIGITAL INPUTS HighSide-ANALOG INPUTS (0 –40V resolution 10mV) –(4-20 mAresolution20uA) –Ratiometric Resolution 0,1%
OUTPUT (TOTAL 13):
N. 4 PWM -DIGITAL OUTPUTS (PLd, CLOSED-LOOP CONTROL SYSTEM, SINGLE OUT 4A MAX)
N. 4 PWM -DIGITAL OUTPUTS (PLc, CLOSED-LOOP CONTROL SYSTEM, SINGLE OUT 4A MAX)
N. 4 DIGITAL HIGH SIDE OUTPUTS (SINGLE OUT 500mA MAX)
N. 1 SQUARE WAVE GENERATOR FOR SAFETY CIRCUIT DIAGNOSTIC COVERAGE
LED: I/O STATUS – COMMUNICATIONSPORTS STATUS (CAN–SERIAL -MICRO SD–USB) – POWER SUPPLY STATUS – DIAGNOSE – L1 and L2: CUSTOMIZABLE
CAN BUS (2 PORTS): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CANBUSPROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL (1 PORT): RS232 UP TO 115200 BAUD
CONNECTIONS (4): REMOVABLE CLAMP CONNECTOR, WIRE SECTION 1.5 mm² / 16 awg
USB: MICRO USBPORT
WORKING TEMPERATURE: -40°C +80°C
SLAVE USAGE EDS FILE
MASTER USAGE ALMEClab
STANDARD C PROGRAM LANGUAGE
PROGRAMMING FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME MIN 5 ms
CPU FAMILY: ARM Cortex M4, 32bit core
CLOCK FREQUENCY : 120MHz
MEMORY FLASH (Program Memory): 1MB
RAM MEMORY: 256KB
EEPROM: 128KB
IMMUNITY TO CONDUCTED INTERFERENCE ISO 7637-2: 2004, pulses 2a, 3a, 3b, 4, severity level 4, function state A
ISO 7637-2: 2004, pulse 1, 2b, severity level 4, function state C
ISO 7637-2: 2004, pulse 5, severity level 1, function state A
ELECTROMAGNETIC EMISSIONS EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY EN 61000-6-2// EN 61000-4-2/3/4/6
PROTECTION IP20
MTTFD 95,5566 YEARS
CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL PLd – SIL2
(DUAL-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
THE DEVICE IS EMC 2004/108 COMPLIANT.

PLC.163DSP

Il controller PLC.163DSP può gestire fino a 20 ingressi e fino a 13 uscite.

Il design compatto e l’ampio assortimento di ingressi e uscite, rendono il controller facilmente integrabile nell’installazione su guida DIN (tipo G / Ω), all’interno di quadri elettrici, dove sono richiesti flessibilità e affidabilità del sistema.

Facile da programmare, utilizzando la piattaforma di sviluppo ALMEClab, può essere implementato in una linea seriale (RS232) o in una rete CAN, come MASTER o SLAVE.

MASTER CODE: PLC.163DSP
POWER SUPPLY: 9 -36 VDC / CURRENT ABSORPTION 50 mA AT 24 VDC (STAND BY MODE)
PUSHBUTTON (TOTAL3): PROGRAMMABLE
INPUT (TOTAL20):
N. 4 DIGITAL INPUTS HighSide–LowSide(voltage threshold is sw configurable)
N.4 DIGITAL INPUTS HighSide–LowSide(voltage threshold is sw configurable) -Frequency/Counter1..1000Hz (resolution 1Hz)
N.4 DIGITAL INPUTS HighSide-ANALOG INPUTS (0 –40V resolution 10mV)
N. 8 DIGITAL INPUTS HighSide-ANALOG INPUTS (0 –40V resolution 10mV) –(4-20 mA resolution 20uA) –Ratiometric Resolution0,1%
OUTPUT (TOTAL 13):
N. 4 PWM -DIGITAL OUTPUTS (PLd, CLOSED-LOOP CONTROL SYSTEM, SINGLE OUT 4A MAX)
N. 4 PWM -DIGITAL OUTPUTS (PLc, CLOSED-LOOP CONTROL SYSTEM, SINGLE OUT 4A MAX)
N. 4 DIGITAL HIGH SIDE OUTPUTS (SINGLE OUT 500mA MAX)
N. 1 SQUARE WAVE GENERATOR FOR SAFETY CIRCUIT DIAGNOSTIC COVERAGE
LED: I/O STATUS – COMMUNICATIONSPORTS STATUS (CAN–SERIAL -MICRO SD–USB) – POWER SUPPLY STATUS – DIAGNOSE – L1 and L2: CUSTOMIZABLE
DISPLAY: 16 CHARACTERS X2 LINES -VISUAL AREA 64.6 (W) X 16.0 (H)
CAN BUS (2 PORTS): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL (1 PORT): RS232 UP TO 115200 BAUD
CONNECTIONS (4): REMOVABLE CLAMP CONNECTOR, WIRE SECTION 1.5 mm² / 16 awg
USB: MICRO USB PORT
WORKING TEMPERATURE: -40°C +80°C
SLAVE USAGE EDS FILE
MASTER USAGE ALMEClab
STANDARD C PROGRAM LANGUAGE
PROGRAMMING FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME MIN 5 ms
CPU FAMILY: ARM Cortex M4, 32bit core
CLOCK FREQUENCY : 120MHz
MEMORY FLASH (Program Memory): 1MB
RAM MEMORY: 256KB
EEPROM: 128KB
IMMUNITY TO CONDUCTED INTERFERENCE ISO 7637-2: 2004, pulses 2a, 3a, 3b, 4, severity level 4, function state A
ISO 7637-2: 2004, pulse 1, 2b, severity level 4, function state C
ISO 7637-2: 2004, pulse 5, severity level 1, function state A
ELECTROMAGNETIC EMISSIONS EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY EN 61000-6-2// EN 61000-4-2/3/4/6
PROTECTION IP20
MTTFD 95,5566 YEARS
CALCULATED ACCORDING TO THE IEC61709 (SIEMENS SN29500), WITH ENVIRONMENTAL FACTORS 3K7 (IEC60721)
PERFORMANCE AND SAFETY INTEGRITY LEVEL PLd – SIL2
(DUAL-CHANNEL INTERNAL SCHEME)
IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
THE DEVICE IS EMC 2004/108 COMPLIANT.

PLC.239

Il controller PLC.239 può gestire fino a 8 ingressi e fino a 8 uscite.

Il design compatto e l’ampio assortimento di ingressi e uscite, rendono il controller facilmente integrabile nell’installazione su guida DIN (tipo G / Ω), all’interno di quadri elettrici, dove sono richiesti flessibilità e affidabilità del sistema.

Può essere implementato in una rete CAN come SLAVE.

MASTER CODE: PLC.239
POWER SUPPLY: 9 -36 VDC
INPUT (TOTAL 8):
4 DIGITAL OPTOCOUPLED INPUTS, WITH COUNTER, ENCODER OPTION
4 ANALOGIC INPUTS: 0÷40Vdc -4÷20mA -DIGITAL HIGH OR LOW SIDE (SOFTWARE SELECTABLE)
OUTPUT (TOTAL 8): 8 OUTPUTS (CLOSED-LOOP CONTROL SYSTEM, SINGLE OUT 4A MAX)
LED: I/O STATUS – CAN PORT STATUS – POWER SUPPLY STATUS – DIAGNOSE
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939 -ISO 11783 (ISO BUS) -FMS
SERIAL (1 PORT): ON REQUEST:RS232 UP TO 115200 BAUD
CONNECTIONS (TOTAL2): REMOVABLE CLAMP CONNECTOR, WIRE SECTION 1.5 mm² / 16 awg
WORKING TEMPERATURE: -40°C +80°C
SLAVE USAGE EDS FILE
MASTER USAGE ALMEClab
STANDARD C PROGRAM LANGUAGE
PROGRAMMING FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL
CPU FAMILY: ARM Cortex M4, 32bit core
IMMUNITY TO CONDUCTED INTERFERENCE ISO 7637-2: 2004, pulses 2a, 3a, 3b, 4, severity level 4, function state A
ISO 7637-2: 2004, pulse 1, 2b, severity level 4, function state C
ISO 7637-2: 2004, pulse 5, severity level 1, function state A
ELECTROMAGNETIC EMISSIONS EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY EN 61000-6-2// EN 61000-4-2/3/4/6
EQUIPMENT REQUIREMENTS AND TESTS EN 61131-2
PROTECTION IP20
IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
THE DEVICE IS EMC 2004/108 COMPLIANT.