Electronic control units
SPLIFT
The SPLIFT is an ECU (Electronic Control Unit) suitable for dual DC motor drive and vehicle management systems.
The device has two proportional power channels for traction and steering control.
The onboard electronic is equipped with a redundant microcontroller, to ensure the failsafe operation and an integrated and configurable tilt sensor to limit or prevent selected functions when the vehicle is tilted.
A PC software tool (via RS232) allows system diagnosis, software updates and parametrization.
The CAN SLAVE version allows to manage the device by a CAN BUS network.
SPN9
SPN8
The SPN8 controller is an ECU (Electronic Control Unit) which can handle up to 24 inputs and up to 20 outputs.
Easy to program, through C programming language on the ALMEClab development platform, it can be implemented in a serial line (RS232) or in a a CAN network, as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN6
The SPN6 controller is an ECU (Electronic Control Unit) which can handle up to 48 inputs and up to 40 outputs.
It can be implementable in RS232 line or CAN network as MASTER or SLAVE
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN6M ST
The SPN6M ST controller is an ECU (Electronic Control Unit) which can handle up to 32 inputs and up to 32 outputs.
The device has a redundant architecture composed of two units (identified as A and B) which are equipped with M7 high-performance microprocessors.
It is freely programmable using the ALMEClab development platform and implemented in a serial line (RS232) or a CAN network, as MASTER or SLAVE unit.
For the prepared version, the device is compatible with installation on the ISOBUS network.
The polyurethane resin case makes the controllers suitable for use on machines that operate in harsh work environments.
SPN6M SMART
The SPN6M SMART controller is an ECU (Electronic Control Unit) equipped with smart high side MOSFETs and a redundant architecture.
It can handle up to 32 inputs and up to 32 outputs.
It can be implemented in a CAN BUS network as SLAVE, with CANopen protocols.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN5
The SPN5 controller is an ECU (Electronic Control Unit) which can handle up to 24 inputs and up to 20 outputs.
It can be implemented in an RS232 line or CAN network as MASTER or SLAVE
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN5M ST
The SPN5M ST controller is an ECU (Electronic Control Unit) which can handle up to 16 inputs, and up to 16 outputs with an M7 high-performance microprocessor.
It is freely programmable using the ALMEClab development platform and implemented in a serial line (RS232) or a CAN network as MASTER or SLAVE unit.
For the prepared version, the device is compatible with installation on the ISOBUS network.
The polyurethane resin case makes the controllers suitable for use on machines that operate in harsh work environments.
SPN5M SMART
The SPN5M SMART controller is an ECU (Electronic Control Unit) which can handle up to 16 inputs and up to 16 outputs.
Easy to program, through C programming language on the ALMEClab development platform, it can be implemented in a serial line (RS232) or in a CAN network, as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN4
The SPN4 controller is an ECU (Electronic Control Unit) which can handle up to 8 inputs and up to 12 outputs.
It can be implemented in a serial line (RS232) or in a CAN network, as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN3
The SPN3 controller is an ECU (Electronic Control Unit) which can handle up to 8 inputs and up to 8 outputs.
It can be implemented in a CAN network, such as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN2
The SPN2 controller is an ECU (Electronic Control Unit) which can handle up to 8 inputs and up to 12 outputs.
It can be implemented in a serial line (RS232) or a CAN network, such as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
SPN1
The SPN1 controller is an ECU (Electronic Control Unit) which can handle up to 8 inputs and up to 12 outputs.
It can be implemented in a serial line (RS232) or a CAN network, such as MASTER or SLAVE.
The polyurethane resin case makes the controllers suitable for use on machines that operate in harsh work environments.
CB01R
The CB01R controller is an ECU (Electronic Control Unit) which can handle up to 16 inputs or outputs.
The small size and the easy installation, makes the controller suitable for low-cost application. It can be implemented in a CAN network, such as MASTER or SLAVE.
The polyurethane resin case makes the controller suitable for use on machines that operate in harsh work environments.
Contacts
Use the form below to write an e-mail to our office, we will reply as soon as possible.
Alternatively, use the following contact details to contact us:
Tel: +39 0173.742821
Fax: +39 0173.70189
Email [email protected]
Assistenza: [email protected]
