Push-buttons panels

They are effectively used for applications where flexibility and reliability of the automation system are required.
Designed to be integrated into a CAN network or in a serial line (RS232), they have all the features for auxiliary or direct control of cranes, aerial platforms, compactors, hook loaders, etc. Built with high-quality components, our push buttons can work in heavy mechanical conditions and withstand the most difficult atmospheric and environmental conditions. They are equipped with an emergency button and a fixing bracket.
Depending on the model, the pictograms on the keyboard are customizable and backlit for a good night view.
The power supply of the push-button panels complies with the automotive standard (9-36 VDC).

Here are all of our models

Download Datasheet

ALNW

The ALNW push-button panel can be implemented in a serial line (RS232) or in a CAN network, as SLAVE.

It’s equipped with an emergency button and 16 physical push-buttons, all with backlight and status led.

The silkscreen printing of the push-button is customizable both with special pictograms on the front keys and with different colors and company logo on the front surface.

The fixing bracket is included.

MASTER CODE : ALNW
POWER SUPPLY: 9-36 VDC / CURRENT ABSORPTION 25mA AT 24VDC (STAND BY MODE)
BUTTONS (TOTAL 20):
N. 16 FRONTAL KEYS (WITH INTEGRATED BACKLIGHT AND SPOTLIGHT)
N. 2 LEFT SIDE BUTTONS (OPTIONAL)
N. 1 RIGHT SIDE BUTTON (OPTIONAL)
N. 1 EMERGENCY STOP BUTTON
LED (TOTAL 17):
N. 16 PROGRAMMABLE SPOTLIGHT LEDS (PUSH BUTTONS INTEGRATED)
N.1 STATUS LED (GREEN & RED BICOLOR)
CAN BUS (1 PORT): 2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST: SAE J1939
SERIAL (1 PORT): RS232 / RS422 / RS485
CONNECTION  WIRED: SPIRAL CABLE SEE PAGE2 FOR OPTIONS
WORKING TEMPERATURE: -20°C+60°C
PROTECTION: IP64

SLAVE USAGE

EDS FILE

PROGRAMMING

FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL

ELECTROMAGNETIC

(EMC)

ACCORDING TO DIRECTIVE 2014/30/EU:
EN 61000-6-4
EN 61000-6-2
EN 50498

ACCORDING WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
Download Datasheet

ALNW.D

The ALNW.D push-button panel can be implemented in a serial line (RS232) or a CAN network, as SLAVE.

It’s equipped with an emergency button and 10 physical push-buttons, all with backlight and status led.

The graphic display is optimal for the intuitively view of the status and the diagnose of the machine.

The silkscreen printing of the push-button is customizable both with special pictograms on the front keys, with different colours and company logo on the front surface.

The fixing bracket is included.

MASTER CODE: ALNW.D
POWER SUPPLY: 9-36 VDC / CURRENT ABSORPTION 25mA AT 24VDC (STAND BY MODE)
BUTTONS (TOTAL 14):
N. 10 FRONTAL KEYS (WITH INTEGRATED BACKLIGHT AND SPOTLIGHT)
N. 2 LEFT SIDE BUTTONS (OPTIONAL)
N. 1 RIGHT SIDE BUTTON (OPTIONAL)
N. 1 EMERGENCY STOP BUTTON
LED (TOTAL 12):
N. 10 PROGRAMMABLE SPOTLIGHT LEDS (PUSH BUTTONS INTEGRATED)
N. 2 STATUS LED (GREEN & RED BICOLOR)
CAN BUS (1 PORT):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
OPTIONAL: SAE J1939
SERIAL (1 PORT):
RS232 / RS422 / RS485
CONNECTION (WIRED): SEE PAGE 2 FOR OPTIONS
DISPLAY:
FSTN -LCD GRAY -WITH ADJUSTABLE BACKLIGHT
1,8’’ -DOT MATRIX:128 X 64 DOTS
41,80 (W) X 26,10 (H) mm –6:00 VIEWINGDIRECTION
WORKING TEMPERATURE: -20°C+60°C
PROTECTION: IP64

SLAVE USAGE

EDS FILE

PROGRAMMING

FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL

ELECTROMAGNETIC

(EMC)

ACCORDING TO DIRECTIVE 2014/30/EU:
EN 61000-6-4
EN 61000-6-2
EN 50498

ACCORDING WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
Download Datasheet

AL35

The AL35 push-button panel can be implemented in a serial line (RS232) or in a CAN network, as SLAVE.

It’s equipped with an emergency button and 16 physical push-buttons, all with backlight and status led.

The silkscreen printing of the push-button is customizable both with special pictograms on the front keys and with different colors and company logo on the front surface.

The fixing bracket is included.

MASTER CODE: AL35
POWER SUPPLY: 9-36 VDC / CURRENT ABSORPTION 25mA AT 24VDC (STAND BY MODE)
KEYS (TOTAL 19):
N. 16 FRONTAL KEYS (WITH INTEGRATED BACKLIGHT AND SPOTLIGHT)
N. 1 LEFT SIDE BUTTONS (OPTIONAL)
N. 1 RIGHT SIDE BUTTON (OPTIONAL)
N. 1 EMERGENCY STOP BUTTON
LED (TOTAL 17):
N. 16 PROGRAMMABLE SPOTLIGHT LEDS (PUSHBUTTONS INTEGRATED)
N.1 STATUS LED (GREEN & RED BICOLOR)
CAN BUS (1 PORT):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS:
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939 (OPTIONAL)
SERIAL (1 PORT):
RS422 –RS485
CONNECTION: (WIRED) SPIRAL CABLE SEE PAGE2 FOR OPTIONS
WORKING TEMPERATURE: -20°C+60°C
PROTECTION: IP64

SLAVE USAGE

EDS FILE

PROGRAMMING

FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL

CYCLE TIME

< 10 ms

ELECTROMAGNETIC
(EMC)

ACCORDING TO DIRECTIVE 2014/30/EU:
EN 61000-6-4
EN 61000-6-2
EN 50498
Download Datasheet

AL14

The AL14 push-button panel can be implemented in a CAN network, as SLAVE.

It is equipped with an emergency button and a membrane keypad with up to 14 push-buttons.

The silkscreen printing of the push-button is customizable both with special pictograms on the front keys, with different colours and company logo on the front surface.

The fixing bracket is included.

MASTER CODE: AL14
POWER SUPPLY: 9-36 VDC / CURRENT ABSORPTION 25mA AT 24VDC (STAND BY MODE)
KEYS (TOTAL 16):
MEMBRANE KEYPADSWITH N. 14 FRONTAL KEYS (N.5 WITH INTEGRATED SPOTLIGHT)
N. 1 SIDE BUTTON (OPTIONAL)
N. 1 EMERGENCY STOP BUTTON
LED (TOTAL 5):
N. 5 PROGRAMMABLE SPOTLIGHT LEDS (PUSHBUTTONS INTEGRATED)
CAN BUS (1 PORT):
2.0B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1 Mbit/s
CAN BUS PROTOCOLS: 
CAN OPEN (CIA DS301 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ONREQUEST:SAE J1939 -ISO 11783 (ISO BUS)
CONNECTION (WIRED): SPIRAL CABLE SEE PAGE2 FOR OPTIONS
WORKING TEMPERATURE: -20°C+60°C
PROTECTION: IP54

SLAVE USAGE

EDS FILE

PROGRAMMING

FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL

CYCLE TIME

< 10 ms

ELECTROMAGNETIC

(EMC)

ACCORDING TO DIRECTIVE 2014/30/EU:
EN 61000-6-4
EN 61000-6-2
EN 50498

ACCORDING WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).
Download Datasheet

AL50C

The AL50C consol works through a cable and is designed to optimize the machine handling and control.
Using a wired-connection, it can be implemented as SLAVE in a CAN network and supplied from an external power supply.

The AL50C is equipped with a lateral emergency button and single axle proportional joysticks.

The silkscreen printing of the push-button is customizable both with special pictograms on the front keys, with different colours and company logo on the front surface.

MASTER CODE: AL50C
POWER SUPPLY: EXTERNAL POWER SUPPLY: 9 36VDC
SWITCH: UP TO N.8 ON/OFF TOOGLE SWITCH (SEE «CONFIGURATION» FOR DETAILS)
N. 1 EMERGENCY STOP BUTTON
ON REQUEST: N.1 PUSHBUTTON
LED: UP TO N.4 PROGRAMMABLE LED (SEE «CONFIGURATION» FOR DETAILS)
JOYSTICK: UP TO N.4 PROPORTIONAL ONE AXLE JOYSTICK (SEE «CONFIGURATION» FOR DETAILS)
CAN BUS (1 PORT): 2.0B COMPLIANT ––(11, 29 BIT) ISO 11898 2 UP TO 1MBIT/S
CAN BUS PROTOCOLS: 
CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939
CONNECTIONS: SORIAU CONNECTOR for SUPPLY AND COMUNICATION
WITH INCLUDED CAP PORTECTION IP65
RADIO: Available on AL50C product. See the dedicated datasheet for further informations.
CASE: PA, BLACK
WORKING TEMPERATURE: -40 C +80 C
PROTECTION: IP 64

SLAVE USAGE EDS FILE
PROGRAMMING FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL

ELECTROMAGNETIC
(EMC)

ACCORDING TO DIRECTIVE 2014/30/EU:
EN 61000-6-4
EN 61000-6-2
EN 50498

PERFORMANCE AND SAFETY INTEGRITY LEVEL

PLc – SIL1
(SINGLE-CHANNEL INTERNAL SCHEME)

ACCORDING WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE).