Operator panels

Designed to be connected in a CAN or serial network (RS232), the panels can be effectively used for applications where flexibility and reliability of the system are mandatory. Easy to program with ALMEClab software development platform (IEC 61131-3 standard).
Depending on the model, they have robust physical manipulators on the front of the panel, designed to make the operations as easy as possible.
The displays with customizable graphics allow you to watch intuitively the status of the machine in any lighting situation.

Here below all our versions

ALMPO SMALL

The ALMPO SMALL panel have 9 buttons with backlight, designed to maximize the operation of the systems on which it’s mounted.

The device with customizable graphics label and keyboard with backlight, allows you to intuitively view the status and the diagnose of the machine.

The device can be implemented in a serial line (RS232) or in a CAN network, as SLAVE.

There are available 2 versions, with different features: Basic version and full version.

CODE: Basic: ALMPO.B – Full: ALMPO.F
POWER SUPPLY: 9 ÷ 36 VDC
INPUT: Basic: NO – Full: N.2 DIGITAL INPUTS HIGH SIDE
OUTPUT: Basic: NO – Full: N.2 DIGITAL HIGH SIDE OUTPUT (MAX 1 A MAX)
BUTTON:
Basic: N.6 FRONTAL KEYS (WITH BACKLIGHT ) –
Full: N.9 FRONTAL KEYS (WITH INTEGRATED BACKLIGHT AND SPOTLIGHT)
LED: Basic: N.3 PROGRAMMABLE LEDS – Full: N.9 PROGRAMMABLE SPOTLIGHT LEDS (PUSHBUTTONS INTEGRATED)
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE) – ON REQUEST: SAE J1939
CAN BUS:
Basic: N.1 PORT:2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S* –
Full: N.1 PORT:2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 – UP TO 1MBIT/S*
SERIAL: Basic: N.1 SERIAL PORT CONNECTION TTL* – Full: N.1 SERIAL PORT CONNECTION TTL*
DISPLAY: LCD TYPE: MONOCROMATIC FSTN – 16 CHARACTERS  X 2 LINES – VISUAL AREA: 64.6 (W) X 16.0 (H)
BUZZER: Basic: NO – Full: YES
CONNECTIONS: Basic: N.1 -M12 4 PIN MALE CONNECTOR – Full: N.1 -M12 8 PIN MALE CONNECTOR
WORKING TEMPERATURE: -20°C +70°C
*NOTE: The device can only suport CAN port OR serial port

SLAVE USAGE EDS FILE
PROGRAMMING FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL
CPU FAMILY: ARM CORTEX M4, 32 bit MICROCONTROLLER CORE
MEMORY STORAGE: 128 KB
RAM: 16 KB
ELECTROMAGNETIC EMISSIONS EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY EN 61000-6-2// EN 61000-4-2/3/4/6
PROTECTION IP 65 ON THE FRONTAL KEYBOARD
IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

ALMSNT

MASTER CODE: CRS.311
POWERSUPPLY:
 9-36 VDC
OUTPUT :
ON REQUEST: N.1 DIGITAL HIGH SIDE OUTPUT (MAX 500 mA)
BUTTONS: 
N. 3 FRONTAL KEYS (WITH INTEGRATED BACKLIGHT)
LEDS: 
N. 10 RAMP OF PROGRAMMABLE STATUS LEDS – N. 6 PROGRAMMABLE LEDS
CAN BUS: 
1 PORT: 2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S – CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE), SAE J1939 (OPTIONAL)
LCD: 
LCD TYPE: HIGH BRIGHTNESS LED – 5 CHARACTER (1 CHARACTER: 7 SEGMENT) – VISUAL AREA: 42(W) X 12.0 (H)
WORKING TEMPERATURE: 
-40°C +80°C

SLAVE USAGE

EDS FILE

PROGRAMMING

FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL

CYCLE TIME

10  mS

ELECTROMAGNETIC EMISSIONS

EN 61000-6-4
EN 55011 (RF RADIATE)

ELECTROMAGNETIC IMMUNITY

EN 61000-6-2
EN 61000-4-2/3/4/6

IP GRADE

IP 66

ELECTRONIC

PERFORANCE AND SAFETY LEVEL

PLc – SIL1
(DUAL-CHANNEL INTERNAL SCHEME)

IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

ALM05

The ALM05 panel has robust physical manipulators on the front of the panel, designed to maximize the operation of the systems on which they are mounted.

The display with customizable graphics allows you to intuitively view the status and the diagnose of the machine.

It can be implemented in a serial line (RS232) or in a CAN network, as SLAVE.

CODE: ALM05
POWERSUPPLY: 9 ÷36 VDC / 20 mACURRENT ABSORPTION AT 24 VDC (STAND BY MODE )
SWITCH / BUTTON (TOTAL 9):
N.4 2 OR 3 POSITIONS TOGGLE SWITCHES
N.3 MEMBRANE KEYS ON THE BACK
N. 1 BUTTON ON THE LEFT SIDE
OPTIONAL: N.1 BUTTON ON THE RIGHT SIDE
N. 1 EMERGENCY BUTTON
LED (TOTAL 8): N. 4 PROGRAMMABLE LEDS – N. 4 SWITCHES STATUS LEDS
CAN BUS (2 PORTS): 2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 -UP TO 1MBIT/S
CAN BUS PROTOCOLS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)
ON REQUEST: SAE J1939
SERIAL (1 PORT): ONREQUEST: RS232 UP TO 115200 BAUD
DISPLAY:
LCD TYPE:MONOCROMATIC FSTN
DOT MATRIX: 240 X 120 DOTS
VISUAL AREA: 72.0 (W) X 37.0 (H) mm
CONNECTIONS (1): M12 8PIN MALE A-CODED CONNECTOR(SEE ELECTRICAL CONNECTIONS TABLE)
ON REQUEST: WIRED CONNECTION OR CUSTOMIZABLE CONNECTOR
WORKING TEMPERATURE: -20°C +70°C
SLAVE USAGE EDS FILE
PROGRAMMING FIRMWARE UPLOAD BY  CAN BUS WITH ALOADER SOFTWARE TOOL
CYCLE TIME 5  ms
ELECTROMAGNETIC EMISSIONS EN 61000-6-4// EN 55011 (RF RADIATE)
ELECTROMAGNETIC IMMUNITY EN 61000-6-2// EN 61000-4-2/3/4/6
IN ACCORDANCE WITH THE  EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

MVS.A3E

The MVS.A3E is suitable for panel installation or with RAM® mounting bracket. 
The adjustable backlight and the high resolution of the LCD display allow an optimal reading of the texts and functions of the machine, in any situation.
Using the Linux operating system, the operating logic and the graphics are easily programmable.
It can be implemented in a serial line (RS232) or in a CAN network, as MASTER or SLAVE.

There are 2 version available, with different features:
MVS.A3EB43 and MVS.A3EF43

MASTER CODE: Basic: MVS.A3EB43 – Full: MVS.A3EF43 
POWERSUPPLY: 
9 ÷36 VDC–55 mA @ 27 VDC IN SLEEP MODE
LED: 
N.1LIGHT SENSOR – N.1 MULTICOLOR LED
CAN BUS: 
N. 2 PORTS: 2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 UP TO 1MBIT/S
SERIAL: 
N. 1 PORTS: RS232 UP TO 115 Kbps
RTC: 
YES
COMMUNICATIONS: Basic:  N.1 USB HOST 2.0 ( LOAD AND UPLOAD SOFTWARES AND Full: DATA )N.1 USB HOST 2.0 ( LOAD AND UPLOAD SOFTWARES AND DATA ) – N.1 ETHERNET (10/100 Mbit/s Base T)
CONNECTIONS: Basic: MAIN: TYCO-AMP 1437288-6
Full: MAIN: TYCO-AMP 1437288-6 – INPUT VIDEO: M12 CONNECTOR, FEMALE, 5-POLE,B-CODED, ACC. TO EN 61076-2-101 – ETHERNET: M12 CONNECTOR, FEMALE, 4-POLE, D-CODED ACC. TO EN 61076-2-101
TOUCH: Basic: NO Full: ANALOGUE RESISTIVE
DISPLAY: LCD TYPE: TFT – DOT MATRIX: 480 X 272 px(WQVGA), 15:9 – VISUAL AREA: 95mm (W) x 53mm (H) – LUMINANCE: typ. 400 cd/m²
BUZZER: Basic: NO – Full: YES –60dB 30 cm distance
WORKING TEMPERATURE: -30°C +75°C
CASE: PC/ABS, with rubber frame

Only for FULL version
OUTPUT (MAX 3): Short circuit protection: Up to 36 V – I max 300 mA open drain – RDS,on < 1 Ohm – RDS,off> 100 kOhm
INPUTS (MAX 4):
Input impedance: > 3k Ohm Resolution: 10 bit (1028 digits, 1 digit = 11,7 mV) – Voltage range: 0 … 12 V – Over-voltage protection & Short circuit protection: Up to 36 V DC – Frequency: Max. signal frequency 50 Hz
INPUT VIDEO (1 PORT): 1 PORT: VSS:1 V – CAMERA SUPPLY: 12 VDC – MAX CURRENT 500 Ma – WITH CAMERA CONTROL OUTPUT FOR SPECTIAL FUNCTION

SLAVE USAGE EDS FILE
MASTER USAGE CODESYS-TOOLS (3.X)
STANDARD C PROGRAM LANGUAGE
CPU Freescale I.MX35®, 532 MHz
MEMORY for BASIC
version
STORAGE: 512 MByte
RAM: 128 Mbyte
for FULL
version
STORAGE: 1 GByte
RAM: 256 MByte
EU Directive 2014/30/EU (EMC) EN 12895 // EN13309 // EN ISO 14982
E1 – Type approval EU Directive ECE R 10.4
IP GRADE IP6k5 and IP6k7
ELECTRICAL ISO 16750-2 // ISO15003
MECHANICAL ISO16750-3
ISO 15003
MECHANICAL SHOCK: LEVEL 2
RANDOM VIBRATION: LEVEL 2
SINUSOIDAL VIBRATION: LEVEL 2
CLIMATE ISO 16750-4 // ISO 15003

MVS.A3S

The MVS.A3S is suitable for panel installation or with RAM® mounting bracket.
The physical manipulators on the front of the panel, the adjustable backlight and the high resolution of the LCD display are designed to maximize the operation of the systems, in any situation.
Using the Linux operating system, the operating logic and the graphics are easily programmable.
It can be implemented in a serial line (RS232) or in a CAN network, as MASTER or SLAVE.

There are 2 version available, with different features:
MVS.A3SB43 and MVS.A3SF43

MASTER CODE: Basic: MVS.A3SB43 – Full: MVS.A3SF43
POWER SUPPLY: 9 ÷36 VDC–55 mA @ 27 VDC IN SLEEP MODE
LEFT/RIGHT KEYPAD: 4 + 4 +3 KEYS WITH MULTICOLOR BACKLIGHT
LED: N.1LIGHT SENSOR – N.1 MULTICOLOR LED – N.3 STATUS LED
ENCODER: ELECTROMECHANICAL ENCODER WITH 16 MECHANICAL DETENTS AND PUSH BUTTON FUNCTION.
DATA: N.2 CANBUS PORT: 2.0 A/B COMPLIANT -(11, 29 BIT) -ISO 11898 UP TO 1MBIT/S – N.1 SERIAL SERIAL: RS232 UP TO 115 Kbps
RTC: YES
COMMUNICATIONS: Basic: N.1 USB HOST 2.0 -FULL SPEED TYP. 150 mA – Full: N.1 USB HOST 2.0 -FULL SPEED TYP. 150 mA – N.1 USB HOST 2.0 –SLOT HIGH SPEED – N.1 ETHERNET (10/100 Mbit/s Base T)
CONNECTIONS: Basic: MAIN: TYCO-AMP 1437288-6
Full: MAIN: TYCO-AMP 1437288-6 – INPUTVIDEO: M12 CONNECTOR, FEMALE, 5-POLE,B-CODED, ACC. TO EN 61076-2-101 – ETHERNET: M12 CONNECTOR, FEMALE, 4-POLE, D-CODED ACC. TO EN 61076-2-101
BUZZER: Basic: NO – Full: YES –60dB 30 cm distance
TOUCH-SCREEN: Basic: NO – Full: ANALOG RESISTIVE
DISPLAY: LCD TYPE: TFT – DOT MATRIX: 480 x 272 px(WQVGA), 15:9 – VISUAL AREA: 95 mm (W) x 53 mm (H) – LUMINANCE: typ. 400 cd/m²
WORKING TEMPERATURE: -30°C +75°C
CASE: PC/ABS, with rubberframe

Only forFULL version
OUTPUT (MAX 3):  Short circuit protection: Up to 36 V – I max 300 mA open drain – RDS,on< 1 Ohm – RDS,off> 100 kOhm
INPUTS (MAX 4): Input impedance: > 3k Ohm Resolution: 10 bit (1028 digits, 1 digit = 11,7 mV) – Voltage range: 0 … 12 V – Over-voltage protection & Short circuit protection: Up to 36 V DC – Frequency: Max. signal frequency 50 Hz
INPUT VIDEO (1 PORT): 1 PORT: VSS:1 V -CAMERA SUPPLY: 12 VDC –MAX CURRENT 500 Ma WITH CAMERA CONTROL OUTPUT FOR SPECTIAL FUNCTION

SLAVE USAGE EDS FILE
MASTER USAGE CODESYS-TOOLS (3.X)
STANDARD C PROGRAM LANGUAGE
CPU Freescale I.MX35®, 532 MHz
MEMORY for BASIC version STORAGE: 512 MByte
RAM: 128 Mbyte
for FULL version STORAGE: 1 GByte
RAM: 256 MByte
EU Directive 2014/30/EU (EMC) EN 12895 // EN13309 // EN ISO 14982
E1 – Type approval EU Directive ECE R 10.4
IP GRADE IP65 – IP66
ELECTRICAL ISO 15003
MECHANICAL ISO16750-3
ISO 15003
MECHANICAL SHOCK: LEVEL 2
RANDOM VIBRATION: LEVEL 2
SINUSOIDAL VIBRATION: LEVEL 2
CLIMATE ISO 16750-4 // ISO 15003

MVS.B3E

The MVS.B3E is suitable for landscape/ portrait, standalone or in-dash mounting.
The adjustable backlight and the high resolution of the LCD display allow an optimal reading of the texts and functions of the machine, in any situation.
Using the Linux operating system, the operating logic and the graphics are easily programmable.
It can be implemented in a serial line (RS232) or in a CAN network, as MASTER or SLAVE.

There are 2 version available, with different features:
MVS.B3EB5 and MVS.B3EF5

MASTER CODE: Basic: MVS.B3EB5 – Full: MVS.B3EF5
POWER SUPPLY: 8 ÷ 36 VDC
LED: N.1 LIGHT SENSOR, N.1 MULTICOLOR LED
CAN BUS:
2 PORTS: 2.0 A/B COMPLIANT – (11, 29 BIT) – ISO 11898 UP TO 1MBIT/S (default 250 Kbit/s)
SERIAL: 1 PORTS: RS232 (Type: EIA232 (only RxD, TxD, GND) – Speed: max. 115.200baud)
RTC: YES
COMMUNICATIONS:
Basic: 
N.1 USB HOST 2.0 ( LOAD AND UPLOAD SOFTWARES AND DATA )
Full: N.1 USB HOST 2.0 ( LOAD AND UPLOAD SOFTWARES AND DATA ) – N.1 ETHERNET (10/100 Mbit/s Base T)
CONNECTIONS:
Basic:
N.1 USB HOST 2.0 (Side connector A High speed. Guaranteed 900mA @ 5V
Full: N.2 USB HOST 2.0 (Side + Back connector A High speed. Guaranteed 900mA @ 5V)
N.1 ETHERNET: (10/100 Mbit/s Base T or Automotive Interface)
OPTIONAL: Via the USB Back connector, a wireless interface can be optional added. E.g. LM816 for WIFI
TOUCH: Basic: OPTIONAL: CAPACITIVE TOUCH – Full: CAPACITIVE TOUCH
DISPLAY: LCD TYPE: TFT – DOT MATRIX: 800 X 480px (WQVGA), 15:9V
VISUAL AREA: 5”, 108 mm (W) x 64.8 mm (H) V – LUMINANCE: typ. 800 cd/m²
BUZZER: YES – 90dB 10 cm distance
AUDIO OUTPUT:  Basic: NO – Full: N.1 (L, R, GND) AC97 COMPATIBLE (MAX POWER ~50mW )
WORKING TEMPERATURE: -30°C +75°C – Storage temperature: -40°C +80°C
CASE: ALUMINIUM DIE CAST, POWDER COATED FRONT-GLASS

Only for FULL version:
INPUT VIDEO (1 PORT): 
1 PORT: 1 VSS  – CAMERA SUPPLY: 12 VDC – MAX CURRENT 300 mA
CAMERA CONTROL OUTPUT (OPEN DRAIN) FOR SPECIAL FUNCTIONALITY (MIRROR, SHUTTER, HEATING ETC.)

 

 

SLAVE USAGE

EDS FILE

MASTER USAGE

OPUS Projektor  // COESYS 3.x // C/C++ //  ISO-VT

CPU

Freescale I.MX6®, 800 MHz

MEMORY

Basic version
STORAGE: 700 MByte
RAM: 512 Mbyte

Full version
STORAGE: 4 GByte
RAM: 512 Mbyte

EU Directive 2014/30/EU (EMC)

EN 50498 // EN13309 // EN ISO 14982
EN 61000-6-2 // EN 61000-6-4

E1 – Type approval

EU Directive ECE R 10.4

IP GRADE

IP66